Install Amps · Ottocanali 1204 Series
Discontinued

OTTOCANALI 1204

1200W/8-channel Flexible Amplifier

8 channels Lo/HiSRMPFCArmoníaPlusGreen powerMyPowersoft
OTTOCANALI 1204
OverviewModelsFeaturesSpecificationsDownloadsRelatedRelated case studies
Overview

Exceptionally flexible and safe, the Ottocanali 1204 provides a wide range of system control and monitoring capabilities, and a total of up to 1,280 W output power over 8 amplifier channels for Lo-Z or constant voltage systems, all neatly packed into a single rack unit: Stand-alone in corporate board rooms, or along with Powersoft’s Installation models in the largest setups, the Ottocanali 1204 fits any venue. The Ottocanali 1204 offers unprecedented versatility and efficiency, also thanks to its very own set of BatFormers®. These are specifically developed, optional plug-in output transformers that can be easily installed through a dedicated lid in the amplifier chassis, and that allows the conversion of any - or all - of the 8 channels into a 70V or 100V constant voltage output. MyPowersoft services are available for this product.

Models

Ottocanali 1204 Series - all models

ModelTotal powerPer channelChannelsForm factorAoIP
OTTOCANALI 12041200 W150 W @ 4 Ω 80 W @ 8 Ω81 RU-
OTTOCANALI 1204 DSP1200 W150 W @ 4 Ω 80 W @ 8 Ω81 RU-
Features
  • Universal switch mode power supply up to 400VAC tolerant with Power Factor Correction
  • Patented output filter with ripple cancellation network
  • Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
  • Detachable AC mains cable with IEC C19/22.2 (16A for EU, 20 A for USA) socket
  • Ac protection: shut down power supply when AC mains voltage is outside operating range
  • Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
  • DC protection: protects against infrasonic signal at the outputs
  • VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals
  • Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
  • Long term limiter: protects the loudspeaker against steady long term RMS (non audio) signals, by reducing maximum output
  • Thermal protection: output stages operating temperature up to 80 °C (176 °F)
  • Temperature controlled continous variable speed fan, front to back airflow
  • Fixed frequency switchmode output stage for high grade sound accuracy
  • Compact 1 RU for reduced rack cost and space
  • Light weight - for easier racking and shipping: 5-11 kg (11-24.3 lbs) depending on number of BatFormers
  • Standard Phoenix connectors: analog and digital input, audio outputs, aux supply, alarms and GPIO
  • Remotely switchable inputs (main and aux) per channel
  • Direct drive either low impedance loads or 70V / 100V Hi-Z distributed lines
  • Switchable 35Hz / 70Hz high pass filter per channel
  • Mixed configuratio with Lo-Z/Hi-Z systems possible
  • Bridged mode low impedance per channel pair
  • General Purpose Input/Output alarm interfaces dangerous DC in the output power signal
  • thermal stress
  • Configurable alarm contact NC/NO per channel
  • Remote AUX input / MAIN input switch
  • Remote ON/OFF switch
  • PWS OUT connector providing up to 24VDC
Specifications
Output power per channel
Output power per channel150 W @ 4 Ω80 W @ 8 Ω
Bridge mode300 W @ 8 Ω150 W @ 16 Ω
Max output voltage / current
Max unclipped output voltage @8 Ω37 Vpeak
Current15 Apeak
AC main power
Power supplyUniversal, regulated switch mode with PFC (Power Factor Correction)
Nominal power requirement100-240 V ±10%, 50-60 Hz
Operating voltage90 V - 264 V
Power consumption/current draw
Idle115 V: 8.7 W - 0.2 A230 V: 9.3 W - 0.30 A
1/8 of max output power @ 4 Ω115 V: 226 W - 2.02 A230 V: 226 W - 1.26 A
1/4 of max output power @ 4 Ω115 V: 417 W - 3.69 A230 V: 417 W - 2.05 A
THERMAL
Operating temperature range0° - 35° C - 32° - 95° F
Thermal dissipation*
Idle Energy save ON115 V: 29.7 BTU/h - 7.48 kcal/h230 V: 31.71 BTU/h - 8 kcal/h
1/8 of max output power @ 4 Ω115 V: 255.75 BTU/h - 64.5 kcal/h230 V: 252.34 BTU/h - 63.64 kcal/h
1/4 of max output power @ 4 Ω115 V: 402.38 BTU/h -101.48 kcal/h230 V: 388.74 BTU/h - 98.04 kcal/h
Where it fits
Arts & TheatresBars & RestaurantsClubsConvention CentersEducationHospitalityHouses of WorshipMalls & Shopping Centres

Ready to spec OTTOCANALI 1204?

Find a Distributor

Your privacy

This site uses cookies and other tracking tools. Necessary cookies make the site work and cannot be refused; for the other purposes you decide, and you can change your mind at any time. Cookie policy · Privacy policy